WIN-WIN
+86 13238824200
  1. Home > Solutions

It's the first picture。

Replay

WWABB4600SS

Author:Evgenia Jin2020-08-21 10:55:31
standpictures
|List view
  • WWABB4600SS

    WWABB4600SS(1/4)

  • WWABB4600SS

    WWABB4600SS(2/4)

  • WWABB4600SS

    WWABB4600SS(3/4)

  • WWABB4600SS

    WWABB4600SS(4/4)

WIN-WIN Standard Single Robot Arm – Rotary Platform Cutting System  

Comparing to Stationary Dual Platform Design, rotation platform has bigger advantage. The rotary cutting table is able to reduce the mobility of staffs. Supposing that these 2 tables are A and B, our operators only need to position at table A to change the workpiece every time, and Cutting head still can process the workpiece on table B. Each time finishing processing on table B, the platform would automatically rotate table A to table B and start the same processing. Stuff will change the workpiece on table B at same position. Rotation time is about 5 seconds, so that the efficiency of processing would be ensured. 

WWABB4600SS(图1)



WWABB4600SS(图2)

Adopts Siemens gear reducer:

The weight of platform is comparative high. Win-Win adopts Siemens gear reducer to stabilize the rotation, so that make sure a higher stability while workstation operation. It is equipped with Omron positioning sensor to improve the cutting accuracy, thanks to this sensor, the re-positioning accuracy of rotary platform reaches up to ±0.05mm. The design of Electric-Gas conforms to the scene working habit, equipped with automatic cycle function, cycle timing function, semi-automatic function, full manual function and so on.

 The rotary platform and the workpiece module are sealed with anti-corrosion sealing materials. Which is anti-wear, fireproof, high hardness, long durability. Platform has four positions that can be adjusted horizontally, making it easy to adjust the height of cutting table. We set a transparent explosion-prof acrylic plate in the middle of rotation platform, which allows the operators to clearly observe the cutting condition.



WWABB4600SS(图3)

WWABB4600SS(图4)

Easy control box

It is essential device for each set of Robotic Waterjet cutting system. Operators usually click on the button of the easy control box to operator the whole system. Such as Pause, Stop, Emergency Stop, Reset, Cycling function. Even for non-experience operators, this easy control design would be very suitable for the operation. Different type of robot workstations should be equipped with the compatible box, more complex box should be operated by professional worker. The complete setting should be operator on General control system, after all setting is completed, we can just click the function buttons on box.

Sample

Easy control box

It is essential device for each set of Robotic Waterjet cutting system. Operators usually click on the button of the easy control box to operator the whole system. Such as Pause, Stop, Emergency Stop, Reset, Cycling function. Even for non-experience operators, this easy control design would be very suitable for the operation. Different type of robot workstations should be equipped with the compatible box, more complex box should be operated by professional worker. The complete setting should be operator on General control system, after all setting is completed, we can just click the function buttons on box.


WWABB4600SS(图5)

WWABB4600SS(图6)

Standard ABB IRB 4600 Robot Body

1: Common Brand Robot: ABB IRB 4600

2: Highest path accuracy and moving control accuracy 

3: Multiple installation types: pedestal, ceiling, wall mounted

4: Avg work time between failures:>8000 hours

5: Modular structure, maintenance, easy to trouble shooting

6: Smart anti-collision technology, quick recovery

7: Robot operating radius meets maximum workpiece requirements

8: ABB4600 extremely applicable for pedestal robotic waterjet


Standard ABB IRB 4600 Robot Body

Single Robot Arm Structure, can reduce cost of Workstation. Rotary Cutting Platform Design, improve the productivity, reduce the working pressure of workers. Closed type of Security Barriers, preventing HP water splash from damaging to the operators and work scene. Able to match the small water flow UHP intensifier pump, reduce cost and meet the demand of working. Easy control box, simple operation, no need full experienced workers, reduce the error rate. Laser sensor, effectively protect all cases beyond occurrence.


WWABB4600SS(图7)

WWABB4600SS(图8)


Vacuum Adsorption System

The high-power centrifugal fan has strong adsorption capacity and the adsorption attenuation effect can reach above 10m

A mobile scrap cart placed at the bottom for easy cleaning and replacement

Adopting sound elimination device, the overall operation of small decibel, low noise, to provide a good environment

Thickened rigid plastic adsorption pipe, firm and stable, can be used for decades

Intermediate loading of material waste box, prevent blockage of adsorption pipeline, easy to clean 


The Robotic Waterjet Cutting Workstation Engineers provide you solutions Online. 

WIN-WIN has the independent design team, who are providing the most suitable Robotic Station Solutions for your Waterjet Cutting Processing. At present, a professional management team to operate the Robotic Waterjet Cutting System business, and keep the components in stock for a long time to ensure fast supply to customers in need. 

You can advise us with your own ideas, and our job is to realize them. So if any demands, please write your requirements to us as detailed as possible, we will discuss and feedback to you with best solution and quotation.




find & message here

Please fill in your information and we will reply you as soon as possible..