WIN-WIN
+86 13238824200
  1. Home > Solutions

It's the first picture。

Replay

WWABB2400CT

Author:AnnaWang2020-08-13 11:09:14
standpictures
|List view
  • WWABB2400CT

    WWABB2400CT(1/3)

  • WWABB2400CT

    WWABB2400CT(2/3)

  • WWABB2400CT

    WWABB2400CT(3/3)

WINWIN Triple Robot Arm Ceiling Type Waterjet Cutting System

Automotive interiors are divided into many models and specifications, and their shapes and sizes are different, so it is important to choose the appropriate robotic waterjet cutting system. The triple ceiling robotic waterjet cutting system is suitable for cutting car roof. For example, roof cutting of BMW 5 series and the upcoming BMW 6 series model. This car interior waterjet cutting system is BMW's nominated waterjet cutting system, with cutting effect is good, high precision, fast efficiency, which meet the cutting standards for luxury car interiors. Below we will introduce this program in details.

WWABB2400CT(图1)

Fully enclosed robot waterjet cutting system:

The great feature of the system is the fully enclosed, housing structure. The robot

 cuts workpiece, in a closed house. There are cameras and transparent windows 

to observe the internal cutting situation. As it were, this structure is almost zero risk, 

and safety can be better guaranteed. The front and back are equipped with lifting roller

 shutter doors. When the operator presses the button to close the roller shutter door, 

the roller shutter door will close and trigger the starting device of the cutting system. 

The system will automatically cut. After the cutting is completed, the roller shutter 

door will automatically open and wait for the next time. Cycle. The operation is very

 convenient. The basic process is to press the start button to cut, change the cutting

 material after cutting, and then press the start button again to cut. In this cycle, 

press the emergency stop button in case of emergency.


floor-mounted robot WINWIN Triple Robot Arm Ceiling Type Waterjet robotic Cutting System (图3)



Ceiling type robotic water cutting system

For the pedestal structure robotic waterjet, this solution is upgraded to a ceiling type, using three ABB IRB 2400 robots. The replaceable robots are: Yaskawa MPX2600, FANUC M20IA, etc. The smaller robot can be used as the execution structure for the ceiling structure. Compared with the pedestal structure, the ceiling-mounted type has a larger effective cutting area, which is also the key for many companies to choose the ceiling-mounted robot. Triple robot arms work at the same time, and each robot arm is responsible for each corresponding part of the same cutting material, the three robot arms cutting work is completed at the same time. This mode will further improve the production efficiency. The production efficiency of the ceiling-mounted robot waterjet cutting equipment is 1.5 times than pedestal dual robot arm waterjet cutting station. In terms of cost, although dual pedestal robot has only two robots, it guarantees the same In the case of cutting range, the pedestal dual robot arm solution needs to be equipped with a larger robot arm, the ceiling type structure only needs to choose three small model robot arm to meet, so comprehensive cost and efficiency considerations, when the situation permits, the ceiling type robot waterjet cutting solution will be more suitable for cutting automotive interior roofs.

WINWIN Triple Robot Arm Ceiling Type Waterjet robotic Cutting System (图4)

                                                                           

   WWABB2400CT(图5)Fully enclosed robot waterjet cutting system 

The great feature of the system is the fully enclosed, housing structure. The robot cuts workpiece, in a closed house. 

  There are cameras and transparent windows to observe the internal cutting situation. As it were, this structure 

  is almost zero risk, and safety can be better guaranteed. The front and back are equipped with lifting roller 

 shutter doors. When  the operator presses the button to close the roller shutter door, the roller shutter door will    close and trigger the starting device of the cutting system. The system will automatically cut. After the cutting  

 is  completed, the roller shutter door will automatically open and wait for the next time. Cycle. The operation is

 very convenient. The basic process is to press the start button to cut, change the cutting material after cutting, and then press the start button again to cut. In this cycle,press  the emergency stop button in case of 

emergency.



WWABB2400CT(图6)

Equipped with a new generation of ultra high pressure water jet intensifier pump

The design purpose of the new generation of ultra-high pressure water jet intensifier pump is to achieve 24 hours of uninterrupted work. This high pressure intensifier pump is designed as a dual intensifier pump, which we define as A intensifier and B intensifier. During normal operation, only the A supercharger is working. When the A supercharger needs maintenance, we only need to switch to the B supercharger to let the B supercharger continue to work. At this time, A can be repaired and maintained The switching process can be completed in about 3-5 minutes. This design reduces the downtime due to equipment failures. If a small problem causes the entire automotive interior parts waterjet cutting production line to stop, it will not be worthwhile. Therefore, it is worthwhile to choose this dual intensifier pump.

WWABB2400CT(图7)

A Summary of Triple Ceiling Robot Waterjet Cutting System

Automotive interior waterjet cutting system-robot waterjet cutting included in the entire workstation

1: Robot system

2: Robot frame and clamping platform

3: Security protection system

4: Ultra high pressure water jet intensifier pump

5: Main control system

6: Vacuum adsorption machine

7: Cooling system

8: Water filtration system

WINWIN is a company specializing in the production of automotive interior cutting equipment. Since its establishment in 2008, it has provided a variety of robotic waterjet cutting equipment for many countries. At present, we are developing other equipment for the production of automotive interiors. Last year, we successfully provided robotic glue machine for automotive interiors to Brazil Toyota. The robotic glue machine is relatively simple and the construction period is relatively short. Our partners include injection molding machines, laminating machines, etc. We can provide customers with a complete set of automotive interior production lines , Robot waterjet cutting equipment and robot glue machine are our specialties. We have long-term partners for injection molding machines and laminating machines. We will be responsible for the design, installation, commissioning and after-sales work of the entire automotive interior production line. You need to consult the equipment related to car interior, please contact us, we will give you a variety of different options.



The Robotic Waterjet Cutting Workstation Engineers provide you solutions Online.

WIN-WIN has the independent design team, who are providing the most suitable Robotic Station Solutions for your Waterjet Cutting Processing. At present, a professional management team to operate the Robotic Waterjet Cutting System business, and keep the components in stock for a long time to ensure fast supply to customers in need.

You can advise us with your own ideas, and our job is to realize them. So if any demands, please write your requirements to us as detailed as possible, we will discuss and feedback to you with best solution and quotation.






find & message here

Please fill in your information and we will reply you as soon as possible..