Compared with other cutting methods, waterjet cutting has unparalleled advantages.
Waterjet cutting is universal cutting:
-When you feel that the thickness of laser and plasma cutting is too thin, the burrs produced are too large, and the heat affected zone is unfavorable, you can consider waterjet cutting;
-When you feel the burrs of flame cutting are too large , the roughness is too bad and the heat-affected zone is too large, you can consider waterjet cutting;
-When you feel that the wire cutting speed is too slow and cannot cut non-conductive materials, you can consider waterjet cutting;
-When you feel that the milling method produces a lot of waste chips and causes a lot of waste, you can also consider using waterjet cutting, because waterjet cutting does not produce waste chips, but the whole piece cutting, most of the materials cut by water cutting are available;
-When you feel that the use of circular saws and band saws is too slow, and you cannot perform non-straight cutting, you can still consider waterjet cutting;
-When you are cutting inflammable and explosive materials or in an inflammable and explosive environment, you must consider waterjet cutting;
-When you do not want to produce toxic side gas, do not need secondary processing, do not want to produce thermal effects or deformation or micro-cracks, and want to produce good cutting edge quality and can cut small holes at the same time, you should consider using robotic waterjet cutting machine.