Waterjet Spare Parts Pneumatic Valve Body Assembly
Pneumatic Valve Body Assembly used for kmt waterjet intensifier pump.
Part Name：Pneumatic Valve Body Assembly
Introduction：KMT Waterjet Pneumatic Valve Body Assembly，waterjet intensifier pump parts, it includes an on off valve body and one set of on off valve repair kit, which suitable for all 60,000 psi waterjet cutting head.
Technical tips：The on off valve body of the Pneumatic Valve Body Assembly can be used repeatedly. When there is a failure, please observe the detection holes on the on off valve body and check the connection devices corresponding to the three monitoring holes. If any of the holes overflows In the case of water, please check the corresponding threaded hole device. It is recommended that every time you change the seal of the on off valve body, you must use the on off valve thread tooling for installation, which will save you time and effort, and it will take longer to use after installation. After each disassembly and before installation, please carefully check and wipe the on off valve body, please clean up the scale or dirt, and check whether the sealing hole of the on off valve body is smooth, if there are no scratches and other impurities, please apply it Lubricate, and then properly use the on off valve sealing tooling for installation the Pneumatic Valve Body Assembly.